SAE 5846 Nickel Alloys
Data updates
This material has 24 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 5846 Chemical Composition
SAE AMS 5846C: 2011 / Alloy, Corrosion and Heat-Resistant, Bars and Forgings 53Ni - 15Cr - 18.5Co - 5.0Mo - 3.2Ti - 4.2Al - 0.03B Double Vacuum Melted Solution, Stabilization, and Precipitation Heat Treated
Looking for full material performance data?
Free registration required • Instant access
SAE 5846 Physical Properties
Temperature
This material has 24 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 5846 Heat Treatments
- Solution Heat Treatment: 1177 °C ± 14, hold at heat for 4 hours ± 0.25, cool in air to room temperature, reheat to 1079 °C ± 14, hold at heat for 4 to 6 hours, and cool at a rate equivalent to an air cool or faster. Stabilization Heat Treatment: 843 °C ± 8, hold at heat for 24 hours ± 1, and cool in air. Precipitation Heat Treatment: 760 °C ± 8, hold at heat for 16 hours ± 1, and cool in air.
SAE 5846 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 5846 International Equivalent Materials
Showing 1 of 2 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 2 international equivalents?
See all 2 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 2Cross References
- 16Composition
- 1Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 1Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers