ASTM B 197 C17300 Copper Alloys
Data updates
This material has 74 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM B 197 C17300 Chemical Composition
B197/B197M: 2020 / Copper-Beryllium Alloy Wire
Looking for full material performance data?
Free registration required • Instant access
ASTM B 197 C17300 Physical Properties
Temperature
This material has 74 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM B 197 C17300 Heat Treatments
- Test specimens shall be heat-treated at a uniform temperature of 316 - 329°C (600 - 625°F) for the times:
TB00 - Solution Heat Treated (A): 3h (For round, hexagonal, octagonal, square and rectangular wires).
TD01 - Solution Heat Treated and Cold Worked: 1/4 Hard (1/4 H): 2h (For round, hexagonal, octagonal, square wires); 2.5h (For rectangular other than square wire).
TD02 - Solution Heat Treated and Cold Worked: 1/2 Hard (1/2 H): 1.5h (For round, hexagonal, octagonal, square wires); 2h (For rectangular other than square wire).
TD03 - Solution Heat Treated and Cold Worked: 3/4 Hard (3/4 H): 1h (For round, hexagonal, octagonal, square wires); 2h (For rectangular other than square wire).
TD04 - Solution Heat Treated and Cold Worked: Hard (H): 1h (For round, hexagonal, octagonal, square wires); 2h (For rectangular other than square wire).
ASTM B 197 C17300 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM B 197 C17300 International Equivalent Materials
Showing 4 of 6 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 6 international equivalents?
See all 6 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 6Cross References
- 7Composition
- 39Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- 1Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 12Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 6Total Suppliers