ASTM B 197 C17200 Copper Alloys
Data updates
This material has 193 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM B 197 C17200 Chemical Composition
B197/B197M: 2020 / Copper-Beryllium Alloy Wire
Looking for full material performance data?
Free registration required • Instant access
ASTM B 197 C17200 Physical Properties
Temperature
This material has 193 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM B 197 C17200 Heat Treatments
- Test specimens shall be heat-treated at a uniform temperature of 316 - 329°C (600 - 625°F) for the times:
TB00 - Solution Heat Treated (A): 3h (For round, hexagonal, octagonal, square and rectangular wires).
TD01 - Solution Heat Treated and Cold Worked: 1/4 Hard (1/4 H): 2h (For round, hexagonal, octagonal, square wires); 2.5h (For rectangular other than square wire).
TD02 - Solution Heat Treated and Cold Worked: 1/2 Hard (1/2 H): 1.5h (For round, hexagonal, octagonal, square wires); 2h (For rectangular other than square wire).
TD03 - Solution Heat Treated and Cold Worked: 3/4 Hard (3/4 H): 1h (For round, hexagonal, octagonal, square wires); 2h (For rectangular other than square wire).
TD04 - Solution Heat Treated and Cold Worked: Hard (H): 1h (For round, hexagonal, octagonal, square wires); 2h (For rectangular other than square wire).
ASTM B 197 C17200 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM B 197 C17200 International Equivalent Materials
Showing 15 of 67 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 67 international equivalents?
See all 67 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 67Cross References
- 6Composition
- 39Mechanical Properties
- 2Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- 1Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 12Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 65Total Suppliers