B.S. CuBe1.9 Copper Alloys
Data updates
This material has 88 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. CuBe1.9 Chemical Composition
BS B 31: 1991 / Specification for copper-beryllium alloy strip, foil and parts (solution treated, cold rolled: full hard (W(H)) and precipitated)
Looking for full material performance data?
Free registration required • Instant access
B.S. CuBe1.9 Physical Properties
Temperature
This material has 88 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. CuBe1.9 Heat Treatments
- Delivery condition: Solution treated and cold rolled (1/2H) at 760 °C <= θ <= 835 °C / Quench (quenching shall be effected by forced air, sprayed water or immersion in oil or water); Use condition: Solution treated and cold rolled and precipitation treated (delivery condition + 315 °C <= θ <= 330 °C / t = 2h / AC).
- Delivery condition: Solution treated at 760 °C <= θ <= 835 °C / Quench (quenching shall be effected by forced air, sprayed water or immersion in oil or water); Use condition: Solution treated and precipitation treated (delivery condition + 315 °C <= θ <= 330 °C / t = 3 h / AC).
B.S. CuBe1.9 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. CuBe1.9 International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 42Composition
- 38Mechanical Properties
- 2Physical Properties
- 5Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers