SAE 8090 Aluminium Alloys
Data updates
This material has 130 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 8090 Chemical Composition
SAE AMS 4259B: 1994 / Aluminum Alloy, Sheet 2.4Li - 1.3Cu - 0.95Mg - 0.10Zr (8090-T6) Solution and Precipitation Heat Treated (Unrecrystallized)
Looking for full material performance data?
Free registration required • Instant access
SAE 8090 Physical Properties
Temperature
This material has 130 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 8090 Heat Treatments
- Solution heat treatment: heat in air within the range 990 to 1000°F (532 to 538°C), hold at the selected temperature within ±5°F (±3°C) for a time commensurate with section thickness, and water quench. Sheet may be heated in a neutral salt bath at the option of the heat treat operator at 988 to 995°F (531 to 535°C), holding for a time commensurate with section thickness, and quenching in water. Precipitation heat treatment: heat in air at 330 to 350°F (166 to 177°C), hold at heat for 30 to 34 hours, and cool in air.
- Solution heat treating temperature (for sheet): 532-538°C (990-1000°F) , followed by an air cool and quenched.
Solution heat treating temperature (for plate): 532-552°C (990-1025°F) , followed by an air cool and quenched.
SAE 8090 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 8090 International Equivalent Materials
Showing 15 of 65 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 65 international equivalents?
See all 65 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 65Cross References
- 13Composition
- 6Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 41Total Suppliers