SAE 6013 Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: United States / SAE
Indicative price:

Data updates

Latest Update: 2023-05
Total number of updates: 8
Update History

This material has 178 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 6013 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cr
VALUE
≤ 0.10
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
0.6 – 1.1
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other each
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

SAE AMS 4216C: 2020 / Aluminum Alloy, Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.50Mn (6013-T6) Solution Heat Treated and Artificially Aged

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 6013 Physical Properties

Temperature

PROPERTY / VALUE
Compression Modulus
70 GPa
Unlock full details
Full data available with free access View Complete Material Data
Modulus of Elasticity
68 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
2.6 — 2.9 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Shear Modulus
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data

This material has 178 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 6013 Heat Treatments

  • Solution heat treating at 538°C for sheets (should not be solution heat treated after forming because it has a tendency to develop a large grain structure due to recrystallization). Solution heat treating at 529°C for rods and bars.
    Aging treatment is mandatory. For sheets: Starting temper is AQ or W, final temper is T4 or T42 (sometimes used to designate final tempers), aging at room temperatures; Starting temper is T4 or T42, final temper is T6 or T62 (sometimes used to designate final tempers), aging at 191°C for 4-5h. When temper before furnace aging is AQ, W, T4 or T42, the furnace aging treatment may be started immediately after quenching or at any time thereafter.
    Solution heat treating soaking times and maximum quench delay times is on specifications.
    Full anneal: At 399-427°C, soaking time is minimum 1h (soak times listed are for up to 13 mm maximum thickness. Add 0.5 hour for each additional 13 mm of product or nested stack thickness or fraction thereof over 13 mm), cooling in furnace (furnace cool at 28°C degrees per hour maximum, to 260°C, air cool to room temperature or furnace cool at 28°C degrees per hour maximum, to 232°C, hold at 232°C for 6 hours, furnace or air cool to room temperature). Stress relief: At 333-349°C, soaking time is minimum 0.5h (soak times listed are for up to 13 mm maximum thickness. Add 0.5 hour for each additional 13 mm of product or nested stack thickness or fraction thereof over 13 mm), cooling in air.
  • Annealing: Soak for 2 to 3 hours at 775°F (413°C); cool at rate of 50°F (28°C) per hour or slower to 500°F (260°C); further cooling rate optional.
    Solution heat treating temperature (for sheet): 563-574°C (1045-1065°F) , followed by an air cool and quenched.
    Solution heat treating temperature (for rod, bar): 560-571°C (1040-1060°F) , followed by an air cool and quenched.

SAE 6013 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 276 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 8 %
Unlock full details
Full data available with free access View Complete Material Data
Compression Yield Strength
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
≥ 145 MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

SAE 6013 International Equivalent Materials

Showing 15 of 75 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
A96013
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
6013
STANDARD
AA
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-6013
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 209 6013
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 744 6013
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-6013
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-AlMg1Si0,8CuMn
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-6013
STANDARD
ASRO
COUNTRY / PRODUCER
Romania
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-AlMg1Si0,8CuMn
STANDARD
ASRO
COUNTRY / PRODUCER
Romania
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-6013
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-AlMg1Si0,8CuMn
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-6013
STANDARD
BDS
COUNTRY / PRODUCER
Bulgaria
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-AlMg1Si0,8CuMn
STANDARD
BDS
COUNTRY / PRODUCER
Bulgaria
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-AlMg1Si0,8CuMn
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
EN AW-6013
STANDARD
CSN
COUNTRY / PRODUCER
Czech Republic
EQUIVALENCE CATEGORY
Composition 100%

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 75 international equivalents?

See all 75 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 75Cross References
  • 22Composition
  • 49Mechanical Properties
  • 13Physical Properties
  • 2Heat Treatment
  • -Metallography
  • -Machinability
  • 10Stress-Strain
  • -Formability
  • 4Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 3Total Suppliers