SAE 328.0 Aluminium Alloys
Data updates
This material has 55 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 328.0 Chemical Composition
SAE J452: 2018 / Chemical compositions, mechanical and physical properties of SAE aluminum casting alloys
Looking for full material performance data?
Free registration required • Instant access
SAE 328.0 Physical Properties
Temperature
This material has 55 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 328.0 Heat Treatments
- Temper T6
Sand Castings:
Solution Heat Treated (1) at 516 ± 6°C (960 ± 10°F), 8-12 hours;
Precipitation Heat Treated at 154 ± 6°C (310 ± 10°F), 2-5 hours.
(1) Quench in water at 65 to 100°C (150 to 212°F) except as noted. - Solution heat treatment shall be at the temperature: 516°C (960°F), minimum soak time is 12 hours and Quenched;
Temper after Solution treatment shall be T4 and delay at room temperature.
Annealing at 441°C (825°F), minimum soak time is 1 hour; Air cooling;
Aging (precipitation heat treatment):
Condition before Aging W or T4;
Aging at 154°C (310°F), soak time is 2-5 hours;
Temper T6 after Aging.
SAE 328.0 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 328.0 International Equivalent Materials
Showing 12 of 18 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 18 international equivalents?
See all 18 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 18Cross References
- 11Composition
- 8Mechanical Properties
- 14Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- 1Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers