SAE 2017 Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: United States / SAE
Indicative price:

Data updates

Latest Update: 2023-05
Total number of updates: 13
Update History

This material has 331 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 2017 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cr
VALUE
≤ 0.1
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
3.5 – 4.5
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other each
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

SAE J454: 1991 / General Data on Wrought Aluminum Alloys

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 2017 Physical Properties

Temperature

PROPERTY / VALUE
Compression Modulus
73 GPa
Unlock full details
Full data available with free access View Complete Material Data
Modulus of Elasticity
69 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
val1
Full data available with free access View Complete Material Data
W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.034 — 0.051 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Shear Modulus
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data
Coefficient of Thermal Expansion (CTE)
val1
Full data available with free access View Complete Material Data
10-6/°C
Unlock full details
Full data available with free access View Complete Material Data

This material has 331 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE 2017 Heat Treatments

  • Solution heat treating at 502°C for all forms.
    Solution heat treating soaking times and maximum quench delay times is on specifications.
    Full anneal: At 399-427°C, soaking time is minimum 1h (soak times listed are for up to 13 mm maximum thickness. Add 0.5 hour for each additional 13 mm of product or nested stack thickness or fraction thereof over 13 mm), cooling in furnace (furnace cool at 28°C degrees per hour maximum, to 260°C, air cool to room temperature or furnace cool at 28°C degrees per hour maximum, to 232°C, hold at 232°C for 6 hours, furnace or air cool to room temperature). Stress relief: At 333-349°C, soaking time is minimum 0.5h (soak times listed are for up to 13 mm maximum thickness. Add 0.5 hour for each additional 13 mm of product or nested stack thickness or fraction thereof over 13 mm), cooling in air.
  • Rolled or cold finished, as ordered, and solution heat treated:

    Product under 12.70 mm or over 178 mm in nominal diameter or distance between parallel sides shall be solution heat treated to -T4 temper;
    Product 12.70 to 178 mm, inclusive, in nominal diameter or distance between parallel sides shall, after solution heat treatment, be stress-relieved by stretching to produce a nominal permanent set of 1 to 3% (-T451 temper);
    Product stress-relieved by stretching shall receive no further straightening operations after stretching unless specifically authorized by purchaser

SAE 2017 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 241.3 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
≥ 90
Unlock full details
Full data available with free access View Complete Material Data
Compression Yield Strength
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 10 %
Unlock full details
Full data available with free access View Complete Material Data
Shear Strength
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

SAE 2017 International Equivalent Materials

Showing 15 of 79 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
A92017
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
2017
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Official
MATERIAL
2017
STANDARD
AA
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
SB-211 2017
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
B 211 2017
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
3.1324
STANDARD
WL
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Official
MATERIAL
B 316 2017
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
AlCuMg1
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Implicit
MATERIAL
3.1325
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Implicit
MATERIAL
1110
STANDARD
GOST
COUNTRY / PRODUCER
Russia
EQUIVALENCE CATEGORY
Implicit
MATERIAL
2017
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 2017P
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A2017P
STANDARD
KS
COUNTRY / PRODUCER
Korea
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
2017
STANDARD
NBR
COUNTRY / PRODUCER
Brazil
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
2017
STANDARD
NMX
COUNTRY / PRODUCER
Mexico
EQUIVALENCE CATEGORY
Composition 100%

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 79 international equivalents?

See all 79 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 79Cross References
  • 44Composition
  • 36Mechanical Properties
  • 26Physical Properties
  • 3Heat Treatment
  • -Metallography
  • -Machinability
  • 10Stress-Strain
  • 2Formability
  • 62Fatigue
  • -Fracture
  • 2Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • 20Ageing
  • -Weatherability
  • -Irradiation
  • 47Total Suppliers