AA 7005 Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: United States / AA
Indicative price:

Data updates

Latest Update: 2021-01
Total number of updates: 7
Update History

This material has 467 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

AA 7005 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cr
VALUE
0.06 – 0.20
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
≤ 0.10
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other each
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6
CRITERIA
Zr
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-67-7

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

AA 7005 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
69 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
val1
Full data available with free access View Complete Material Data
Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Shear Modulus
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
val1
Full data available with free access View Complete Material Data
W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data

This material has 467 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

AA 7005 Heat Treatments

  • The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

    The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

    The time at precipitation heat treatment temperature will depend on time required for load to reach temperature. The times shown are based on rapid heating, with soaking time measured from the time the load reached within 5°C of the applicable temperature.

    Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

    For extruded rod, bar and profiles

    Temper T1: Quenched directly from the extrusion press, naturally aged. Some extrusions may be adequately quenched using a room temperature air blast. By definition, this temper designation is that which would apply after natural aging even though mechanical properties for this alloy-temper product have not been registered.

    Temper T53: Quenched directly from the extrusion press, held at room temperature for 72 hours followed by two stage precipitation heat-treatment of 8 hours at 105°C plus 16 hours at 150°C. Some extrusions may be adequately quenched using a room temperature air blast.

AA 7005 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 345 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Reduction of Area
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

AA 7005 International Equivalent Materials

Showing 15 of 62 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
A97005
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-7005
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-AlZn4,5Mg1,5Mn
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-7005
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-AlZn4,5Mg1,5Mn
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-7005
STANDARD
ASRO
COUNTRY / PRODUCER
Romania
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-AlZn4,5Mg1,5Mn
STANDARD
ASRO
COUNTRY / PRODUCER
Romania
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-7005
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-AlZn4,5Mg1,5Mn
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Official
MATERIAL
74530
STANDARD
IS
COUNTRY / PRODUCER
India
EQUIVALENCE CATEGORY
Official
MATERIAL
7005
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Official
MATERIAL
AlZn4.5Mg1.5Mn
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-7005
STANDARD
BDS
COUNTRY / PRODUCER
Bulgaria
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-AlZn4,5Mg1,5Mn
STANDARD
BDS
COUNTRY / PRODUCER
Bulgaria
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-7005
STANDARD
CSN
COUNTRY / PRODUCER
Czech Republic
EQUIVALENCE CATEGORY
Official

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 62 international equivalents?

See all 62 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 62Cross References
  • 24Composition
  • 124Mechanical Properties
  • 51Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • 9Stress-Strain
  • -Formability
  • 35Fatigue
  • 1Fracture
  • 1Creep
  • 15Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • 1Corrosion
  • 140Ageing
  • -Weatherability
  • -Irradiation
  • 3Total Suppliers