AA 2117 Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: United States / AA
Indicative price:

Data updates

Latest Update: 2020-07
Total number of updates: 5
Update History
2019-04 2016-02 2015-05 2013-11

This material has 279 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

AA 2117 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cr
VALUE
≤ 0.10
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
2.2 – 3.0
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other each
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Other total
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

AA 2117 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
69 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.043 — 0.0431 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Melting Temperature
val1
Full data available with free access View Complete Material Data
°C
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
154.808 — 155 W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 279 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

AA 2117 Heat Treatments

  • The times and temperatures are typical for various forms, sizes and methods of manufacture and may not exactly describe the optimum treatment for a specific item.

    The nominal temperatures at which metal is heated (applies both for solution and precipitation heat treatment) should be attained as rapidly as possible and maintained ± 5°C of nominal during the time at temperature.

    Material should be quenched from the solution heat-treating temperature as rapidly as possible and with minimum delay after removal from the furnace. Quenching is typically performed by immersion of wrought products in a cold water bath, although some forgings are quenched in hot-water. Quenching may be performed by alternative means such as total immersion in an aqueous polymer solution, liquefied gas, hot water, or boiling water, or by air blast or fog to minimize distortion provided samples from the material. The use of high-velocity high-volume jets of cold water is also effective for some materials.

    For rolled or cold finished wire and rod

    Temper T4: Solution heat treated at 500°C, quenched, naturally aged.

    Temper T42: Solution heat treated at 500°C, quenched, naturally aged.

    Annealing (O)

    Heated at 415°C, held for 2-3 hours. This treatment is intended to remove effects of solution heat treatment and include cooling at a rate of about 30°C per hour from the annealing temperature to 260°C. The rate of subsequent cooling is unimportant. Treatment at 345°C, followed by uncontrolled cooling, may be used to remove the effects of cold work, or to partially remove the effects of heat treatment.

AA 2117 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 260 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

AA 2117 International Equivalent Materials

Showing 15 of 91 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
AlCu2,5Mg0,5
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Official
MATERIAL
3.1305
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Official
MATERIAL
A92117
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-2117
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-2117
STANDARD
CSN
COUNTRY / PRODUCER
Czech Republic
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-Al Cu2,5Mg
STANDARD
CSN
COUNTRY / PRODUCER
Czech Republic
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-2117
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-Al Cu2,5Mg
STANDARD
DIN
COUNTRY / PRODUCER
Germany
EQUIVALENCE CATEGORY
Official
MATERIAL
EN AW-Al Cu2,5Mg
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Official
MATERIAL
1180
STANDARD
GOST
COUNTRY / PRODUCER
Russia
EQUIVALENCE CATEGORY
Official
MATERIAL
D18
STANDARD
GOST
COUNTRY / PRODUCER
Russia
EQUIVALENCE CATEGORY
Official
MATERIAL
AlCu2.5Mg
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Official
MATERIAL
AlCu2Mg
STANDARD
MSZ
COUNTRY / PRODUCER
Hungary
EQUIVALENCE CATEGORY
Official
MATERIAL
AlCu2,5Mg0,5
STANDARD
ONORM
COUNTRY / PRODUCER
Austria
EQUIVALENCE CATEGORY
Official
MATERIAL
L-3180
STANDARD
UNE
COUNTRY / PRODUCER
Spain
EQUIVALENCE CATEGORY
Official

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 91 international equivalents?

See all 91 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 91Cross References
  • 20Composition
  • 48Mechanical Properties
  • 26Physical Properties
  • 1Heat Treatment
  • -Metallography
  • 1Machinability
  • 3Stress-Strain
  • 1Formability
  • 4Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • 40Ageing
  • -Weatherability
  • -Irradiation
  • 44Total Suppliers