AA 1445 Aluminium Alloys
Data updates
This material has 7196 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AA 1445 Chemical Composition
International alloy designations and chemical composition limits for wrought aluminum and wrought aluminum alloys - Teal Sheets (2025), 2025
Looking for full material performance data?
Free registration required • Instant access
AA 1445 Physical Properties
Temperature
This material has 7196 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AA 1445 Heat Treatments
- The alloy ingot was homogenized at 470°C for 8 h followed by heating at 520° C for 24 h. After homogenization, the ingots were rolled into plate with t = 5.6 mm through hot rolling. After annealing, the plate was cold-rolled to sheet with t = 2.6 mm. After solutionizing in a salt bath furnace at 525°C for 1 h followed by quenching in water, the sheet was then subjected to a two-step T8 temper (second-step aging at 170°C following first step aging at 150°C for 4 h after 6% pre-deformation through cold rolling).
AA 1445 International Equivalent Materials
Showing 2 of 2 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 2 international equivalents?
See all 2 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 2Cross References
- 4Composition
- -Mechanical Properties
- 4Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 1360Joints
- -Coatings
- -Dimensions
- -Tribology
- 5823Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers