GOST 347H Stainless steels
Data updates
This material has 193 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
GOST 347H Chemical Composition
GOST R 71798: 2024 / Pipes of austenitic chromium-nickel stainless steel, welded by electric fusion welding, for high temperature service and general applications. Specification
Looking for full material performance data?
Free registration required • Instant access
GOST 347H Physical Properties
Temperature
This material has 193 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
GOST 347H Heat Treatments
- Annealed at > 1040°C, quenching in water or accelerated cooling by other means.
Solution annealing at temperatures above 1065°C may degrade the intergranular corrosion resistance after further exposure to sensitizing conditions. At customer's request, solution annealing at high temperatures may be followed by re-annealing or stabilization at a lower temperature. - Cold-rolled: Heated to > 1095°C, quenching with water or cooling by other means at a rate sufficient to ensure the required characteristics of the product.
Hot-rolled: Heated to > 1050°C, quenching with water or cooling by other means at a rate sufficient to ensure the required characteristics of the product.
GOST 347H Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
GOST 347H International Equivalent Materials
Showing 15 of 148 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 148 international equivalents?
See all 148 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 148Cross References
- 16Composition
- 11Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 5Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 8Total Suppliers