PROPRIETARY BÖHLER W300 ISODISC Tool steels
Data updates
This material has 292 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER W300 ISODISC Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER W300 ISODISC Physical Properties
Temperature
This material has 292 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER W300 ISODISC Heat Treatments
- Annealing: 750-800°C (1382-1472°F), holding time 6 to 8 hours. Slow, controlled furnace cooling at 10 to 20°C/h (18 to 36°F/hr) to approx. 600°C (1112°F), further cooling in air.
Stress relieving: 600-670°C (1112-1238°F), for stress relief after extensive machining or for complicated tools. Holding time depending on tool size after complete heating 2-6 hours in neutral atmosphere. Slow furnace cooling.
Hardening and Tempering: 1000-1030°C (1832-1886°F), holding time after temperature equalization: 15 to 30 minutes; Quenching: Oil, salt bath (500-550°C [932-1022°F]), air, vacuum; After hardening, tempering to the desired working hardness.
PROPRIETARY BÖHLER W300 ISODISC Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER W300 ISODISC International Equivalent Materials
Showing 15 of 110 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 110 international equivalents?
See all 110 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 110Cross References
- 6Composition
- 62Mechanical Properties
- 16Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 95Total Suppliers