PROPRIETARY BÖHLER M368 MICROCLEAN Stainless steels
Data updates
This material has 27 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER M368 MICROCLEAN Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER M368 MICROCLEAN Physical Properties
Temperature
This material has 27 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER M368 MICROCLEAN Heat Treatments
- Hardening and Tempering: 980-1000°C (1796-1832°F). For hardening hold at temperature for 15 to 30 min. An optional sub-zero treatment at -80°C (-112°F) can be applied after hardening. For highest corrosion resistance, temper once for a minimum of 2h at 250-350°C (482-662°F). For best wear resistance, temper twice for a minimum of 2h at 505-520°C (941-968°F) (without sub-zero treatment) or 490-505°C (914-941°F) (with sub-zero treatment). After each heat treatment step, material should be cooled down to approx. 30°C.
PROPRIETARY BÖHLER M368 MICROCLEAN Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER M368 MICROCLEAN International Equivalent Materials
Showing 2 of 3 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 3 international equivalents?
See all 3 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 3Cross References
- 7Composition
- 1Mechanical Properties
- 12Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 3Total Suppliers