MSZ 1.4106 Stainless steels
Data updates
This material has 109 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
MSZ 1.4106 Chemical Composition
EN 10088-1: 2023 / Stainless steels - Part 1: List of stainless steels
Looking for full material performance data?
Free registration required • Instant access
MSZ 1.4106 Physical Properties
Temperature
This material has 109 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
MSZ 1.4106 Heat Treatments
- Hot working (air cooling): 1100-800°C
+A - Annealing (air cooling): 750-850°C.
Hot formed conditions:
1U - Hot formed, not heat treated, not descaled.
1C - Hot formed, heat treated, not descaled.
1E - Hot formed, heat treated, mechanically descaled.
1D - Hot formed, heat treated, pickled, coated (optional).
1X - Hot formed, heat treated, rough machined.
1G - Hot formed, heat treated, descaled, rough machined or shaved in the case of rod.
Cold processed conditions:
2H - Finishes 1E, 1D or 1X, cold processed, coated (optional).
2D - Finish 2H, heat treated, pickled and skin- passed (optional), coated (optional).
2B - Finishes 1E, 1D or 1X, cold processed, mechanically smoothed.
2G - Finishes 2H, 2D or 2B, centreless ground, mechanically smoothed (optional).
P - Finishes 2H, 2D, 2B or 2G, specular polishing.
MSZ 1.4106 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
MSZ 1.4106 International Equivalent Materials
Showing 15 of 44 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 44 international equivalents?
See all 44 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 44Cross References
- 15Composition
- 23Mechanical Properties
- 18Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 5Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 3Total Suppliers