PROPRIETARY H080-23 Magnetic and electrical materials

Material group: Ferrous Alloys / Magnetic and electrical materials
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2023-12
Total number of updates: 1
Update History

This material has 20 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY H080-23 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.48 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
7.65 — 7.8 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 20 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY H080-23 Heat Treatments

  • Short-time annealing: Laminations are usually subjected to short-time annealing in a roller furnace. This process takes a few minutes and requires a soaking time of 1 to 2 minutes at a maximum temperature of 860°C.
    Long-time annealing: Wound cores and stacking transformers undergo long-time annealing in a box-type furnace. Long-time annealing should be carries out under the following conditions: soaking temperature: min. 820°C, max. 840°C to 850°C; soaking time: 2 hours (the coolest part of the material must be at least 800°C); cooling: preferably within the furnace to about 200°C to 300°C; protective atmosphere: preferably 100% nitrogen, addition of hydrogen is not recommended.

PROPRIETARY H080-23 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
330 — 420 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
6 — 48 %
Unlock full details
Full data available with free access View Complete Material Data
Rockwell Hardness (HR)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Vickers Hardness (HV)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
300 — 360 MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 1Cross References
  • -Composition
  • 10Mechanical Properties
  • 7Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers