PROPRIETARY ASP 2062 Tool steels

Material group: Ferrous Alloys / Tool steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2025-10
Total number of updates: 3
Update History
2023-11 2023-06

This material has 37 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY ASP 2062 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
1.30
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
3.8
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Mo
VALUE
10.5
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
V
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-62-2
CRITERIA
W
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-33-7

Erasteel, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY ASP 2062 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 240 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.72 — 8.2 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 37 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY ASP 2062 Heat Treatments

  • Soft annealing in a protective atmosphere at 850-900°C for 3 hours, followed by slow cooling at 10°C/h down to 700°C, then air cooling.

    Stress-relieving at 600-700°C for approximately 2 hours, slow cooling down to 500°C.

    Hardening in a protective atmosphere with pre-heating in 2 steps at 450-500°C and 850-900°C and austenitising at a temperature suitable for chosen working hardness. Cooling down to 40-50°C.

    Tempering at 560°C four times for at least 1 hour each time. Cooling to room temperature < 25°C between tempers. (Four temperings are recommended in order to remove all retained austenite and ensure a fully tempered martensitic matrix.)

PROPRIETARY ASP 2062 Mechanical Properties

Temperature

PROPERTY / VALUE
Brinell Hardness (HB)
290
Unlock full details
Full data available with free access View Complete Material Data
Rockwell Hardness (HR)
63.21 — 67.6
Unlock full details
Full data available with free access View Complete Material Data
Impact Energy
14 — 21.1 J
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 2Cross References
  • 5Composition
  • 17Mechanical Properties
  • 11Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers