PROPRIETARY BÖHLER W300 ISOBLOC Tool steels
Data updates
This material has 236 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER W300 ISOBLOC Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER W300 ISOBLOC Physical Properties
Temperature
This material has 236 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER W300 ISOBLOC Heat Treatments
- Annealing: 750-800°C (1382-1472°F); Holding time 6 to 8 hours. Slow controlled cooling in furnace at a rate of 10 to 20°C/hr (18 to 36°F/hr) down to approx. 600°C (1112°F), further cooling in air.
Stress relieving: 600-670°C (1112-1238°F); For stress relief after extensive machining or for complicated tools. Holding time depending on tool size after complete heating 2-6 hours in neutral atmosphere. Slow furnace cooling.
Hardening and tempering: 1000-1030°C (1832-1886°F); (Die casting equipment: 1000-1010°C [1832-1850°F]) Holding time after temperature equalization: 15 to 30 minutes; Quenching: Oil, salt bath (500-550°C [932-1022°F]), air, vacuum; After hardening, tempering to the desired working hardness.
PROPRIETARY BÖHLER W300 ISOBLOC Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER W300 ISOBLOC International Equivalent Materials
Showing 15 of 109 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 109 international equivalents?
See all 109 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 109Cross References
- 6Composition
- 8Mechanical Properties
- 15Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 95Total Suppliers