PROPRIETARY SIRIUS 800 Stainless steels
Data updates
This material has 206 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIRIUS 800 Chemical Composition
Industeel, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY SIRIUS 800 Physical Properties
Temperature
This material has 206 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIRIUS 800 Heat Treatments
- When Ti + Al exceeds 0.55%, precipitation hardening by g’ phase occurs in the temperature range from 500 to 600°C (932 to 1112°F), but only after several hundreds or even thousands of hours, and cannot therefore be obtained by simple heat treatment. The applicable heat treatment therefore is annealing at 980°C (1796°F).
Hot forming: depending on the equipment used, hot forming operations can be carried out in the range from 1100 to 850°C (2012 to 1562°F). Slightly oxydizing or neutral atmosphere are recommended during heat treatment. Sulfur compounds are strictly prohibited in the furnace atmosphere.
Cold forming: Softening is generally necessary after forming and can be obtained by annealing at 980°C.
PROPRIETARY SIRIUS 800 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY SIRIUS 800 International Equivalent Materials
Showing 15 of 75 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 75 international equivalents?
See all 75 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 75Cross References
- 10Composition
- 16Mechanical Properties
- 47Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 56Total Suppliers