PROPRIETARY 13C26 razor blade steel Stainless steels
Data updates
This material has 27 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 13C26 razor blade steel Chemical Composition
Sandvik Materials Technology, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 13C26 razor blade steel Physical Properties
Temperature
This material has 27 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 13C26 razor blade steel Heat Treatments
- During heating [1], or austenitizing, the ferrite is transformed into austenite and the carbides are partly dissolved. Because of the carbide dissolution, the contents of carbon and chromium in the matrix increase. The subsequent quenching to room temperature [2] will transform most of the austenite into martensite. During deep freezing of the material to -70°C (-94°F) [3], even more austenite is transformed into martensite. The remainder, about 15%, is known as retained austenite. Finally, since the material is now very brittle, the toughness, and also the hardness, is increased by a tempering treatment [4].
Temperature cycle for hardening. [1] 25 seconds above 1000°C (1830°F); 10 seconds at top temperature 1080-1100°C (1975-2010°F). All values are approximate and only for guidance
PROPRIETARY 13C26 razor blade steel International Equivalent Materials
Showing 3 of 3 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 3 international equivalents?
See all 3 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 3Cross References
- 12Composition
- -Mechanical Properties
- 5Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 5Total Suppliers