PROPRIETARY SIHARD 2519 Tool steels
Data updates
This material has 43 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIHARD 2519 Chemical Composition
SIJ Metal Ravne, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY SIHARD 2519 Physical Properties
Temperature
This material has 43 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIHARD 2519 Heat Treatments
- Soft annealing: Heat to 720-750°C, cool slowly in furnace. This will produce a maximum Brinell hardness of 230.
Stress relieving: Stress relieving to remove machining stresses should be carried out by heating to approx. 650°C, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening: Harden from a temperature of 780-820°C, 800-860°C followed by water or oil quenching. Hardness after quenching is min. 64-65 HRC.
Tempering temperature: 150-300°C.
PROPRIETARY SIHARD 2519 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY SIHARD 2519 International Equivalent Materials
Showing 8 of 13 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 13 international equivalents?
See all 13 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 13Cross References
- 6Composition
- 5Mechanical Properties
- 10Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 7Total Suppliers