PROPRIETARY SIHARD 2419 Tool steels
Data updates
This material has 54 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIHARD 2419 Chemical Composition
SIJ Metal Ravne, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY SIHARD 2419 Physical Properties
Temperature
This material has 54 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY SIHARD 2419 Heat Treatments
- Soft annealing: Heat to 720-750°C, cool slowly in furnace. This will produce a maximum Brinell hardness of 230.
Stress relieving: Stress relieving to remove machining stresses should be carried out by heating to approx. 650°C, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
Hardening: Harden from a temperature of 800-830°C followed by oil quenching or warm bath quenching approx. 200°C. Hardness after quenching is 63-65 HRC.
PROPRIETARY SIHARD 2419 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY SIHARD 2419 International Equivalent Materials
Showing 10 of 14 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 14 international equivalents?
See all 14 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 14Cross References
- 5Composition
- 7Mechanical Properties
- 16Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 10Total Suppliers