PROPRIETARY SIHARD 2063 Tool steels

Material group: Ferrous Alloys / Tool steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2021-10
Total number of updates: 1
Update History

This material has 25 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY SIHARD 2063 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
1.50
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
1.40
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Mn
VALUE
0.60
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3

SIJ Metal Ravne, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY SIHARD 2063 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.72 — 8 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
0.27 — 0.3
Unlock full details
Full data available with free access View Complete Material Data

This material has 25 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY SIHARD 2063 Heat Treatments

  • Soft annealing: Heat to 740-760°C, cool slowly in furnace. This will produce a maximum Brinell hardness of 230.
    Stress relieving: Stress relieving to remove machining stresses should be carried out by heating to 650°C, holding for 1-2 hours at heat, followed by air cooling. This operation is performed to reduce distortion during heat treatment.
    Hardening: Harden from a temperature of 830-860°C followed by oil quenching (interrupt at approx. 150°C). Hardness after quenching is 64 HRC.

PROPRIETARY SIHARD 2063 Mechanical Properties

Temperature

PROPERTY / VALUE
Rockwell Hardness (HR)
54 — 63.5
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

PROPRIETARY SIHARD 2063 International Equivalent Materials

Showing 2 of 5 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
Ch.4840
STANDARD
JUS
COUNTRY / PRODUCER
Yugoslavia
EQUIVALENCE CATEGORY
Implicit
MATERIAL
D A G
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Implicit

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 5 international equivalents?

See all 5 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 5Cross References
  • 4Composition
  • 4Mechanical Properties
  • 5Physical Properties
  • 2Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 5Total Suppliers