GB ZG16Cr9Mo Cast steels
Data updates
This material has 149 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
GB ZG16Cr9Mo Chemical Composition
GB/T 16253: 2019 / Steel castings for pressure purposes
Looking for full material performance data?
Free registration required • Instant access
GB ZG16Cr9Mo Physical Properties
Temperature
This material has 149 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
GB ZG16Cr9Mo Heat Treatments
- Quenched and tempered (+QT): Quenched at 960 to 1020°C and Tempered at 680 to 730°C
- Normalized or quenched at 960-1020°C; Tempered at 680-730°C.
The holding time for normalizing or quenching heating should be calculated based on the maximum wall thickness of the casting loaded in the furnace. When the thickness is less than or equal to 25 mm, the holding time shall not be less than 1 hour. For every 25 mm increase in wall thickness, the holding time shall increase by 1 hour.
GB ZG16Cr9Mo Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
GB ZG16Cr9Mo International Equivalent Materials
Showing 15 of 59 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 59 international equivalents?
See all 59 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 59Cross References
- 20Composition
- 20Mechanical Properties
- 1Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 47Total Suppliers