PROPRIETARY 316L (18-11ML) Stainless steels
Data updates
This material has 1370 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 316L (18-11ML) Chemical Composition
Aperam, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 316L (18-11ML) Physical Properties
Temperature
This material has 1370 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 316L (18-11ML) Heat Treatments
- Annealing
After cold forming (work hardening) and after welding an annealing treatment for a couple of minutes at 1050 ± 25°C followed by air cooling or water quenching restores the microstructure (recrystallisation and dissolution of carbides) and eliminates internal stresses. After annealing, pickling followed by passivation is necessary.
Pickling
- Nitric-Hydrofluoric acid mixture (10%HNO3 + 2% HF) at ambient temperature or up to 60°C.
- Sulfuric-nitric acid mixture (10% H2SO4 + 0.5%NHO3) at 60°C
- Descaling pastes for weld areas.
- Passivation Heat treatment and finishing
- 20-25% HNO3 solution (36° Baumé) at 20°C.
- Passivating pastes for weld zones.
PROPRIETARY 316L (18-11ML) Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY 316L (18-11ML) International Equivalent Materials
Showing 15 of 751 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 751 international equivalents?
See all 751 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 751Cross References
- 6Composition
- 52Mechanical Properties
- 79Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 17Stress-Strain
- 1Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 463Total Suppliers