PROPRIETARY BÖHLER W360 AMPO Tool steels
Data updates
This material has 17 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER W360 AMPO Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER W360 AMPO Physical Properties
Temperature
This material has 17 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER W360 AMPO Heat Treatments
- Stress relieving: 690°C in a neutral atmosphere. After through-heating, soak for 1 to 2 hours. Cool slowly in furnace
Hardening: 1050°C. Oil or vacuum furnace with gas quenching. Holding time at hardening temperature after through-heating: 15 to 20 minutes. Achievable hardness: see tempering chart.
Tempering (according to tempering chart): at least twice. Heat slowly to tempering temperature immediately after hardening. Holding itme at tempering temperature 1.5 hours per temper. A third temper is advantageous.
PROPRIETARY BÖHLER W360 AMPO Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER W360 AMPO International Equivalent Materials
Showing 1 of 2 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 2 international equivalents?
See all 2 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 2Cross References
- 7Composition
- 5Mechanical Properties
- 1Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers