TCVN 36CrNiMo4 Structural and constructional steels
Data updates
This material has 275 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
TCVN 36CrNiMo4 Chemical Composition
TCVN 12142-2: 2017 / Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering
Looking for full material performance data?
Free registration required • Instant access
TCVN 36CrNiMo4 Physical Properties
Temperature
This material has 275 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
TCVN 36CrNiMo4 Heat Treatments
- Hardening at 820-850°C (Temperatures at the lower end of the range are generally used for water, and those at the upper end for oil quenching; Time for austenitizing as a guide: at least 30 min.)
Quenching agent: Oil or water (When choosing the quenching agent, the influence of other parameters, such as shape, dimensions and quenching temperature, on properties and crack susceptibility, should be taken into account. Other quenching agents such as synthetic quenchants may also be used.)
Tempering at 540-680°C (Time for tempering as a guide: at least 60 min.)
End quench test austenitizing at 850 ± 5°C (Time for austenitizing as a guide: 30-35 min.)
The given conditions are for guidance. However, the temperatures specified for the end quench test are mandatory.
TCVN 36CrNiMo4 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
TCVN 36CrNiMo4 International Equivalent Materials
Showing 15 of 120 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 120 international equivalents?
See all 120 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 120Cross References
- 18Composition
- 25Mechanical Properties
- 3Physical Properties
- 4Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 105Total Suppliers