SEW X 32 CrMoV 3 3 Tool steels
Data updates
This material has 164 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SEW X 32 CrMoV 3 3 Chemical Composition
SEW 250: 1970 / Hot work tool steels
Looking for full material performance data?
Free registration required • Instant access
SEW X 32 CrMoV 3 3 Physical Properties
Temperature
This material has 164 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SEW X 32 CrMoV 3 3 Heat Treatments
- Soft annealing: Slowly heated at 750-800°C, held for several hours, slowly cooled, preferably in the furnace.
The soft annealing is most appropriate for machining and cold working and provides the most favorable initial structure for tool hardening.
Hardening: Heated at 1020-1060°C, held for 15-30 minutes, oil quenched or hardened in warm bath at 500-550°C.
Stress relief annealing: Slowly heated 650°C, held for 1-2 hours, slowly cooled in the furnace.
Steel is nitrided in salt baths, gas or powder. The nitriding layer thickness may be 0.01-0.3 mm depending on necessity and method and is usually 0.1 mm.
SEW X 32 CrMoV 3 3 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SEW X 32 CrMoV 3 3 International Equivalent Materials
Showing 15 of 76 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 76 international equivalents?
See all 76 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 76Cross References
- 6Composition
- 1Mechanical Properties
- 4Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 7Joints
- -Coatings
- 3Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 66Total Suppliers