SEW 60 WCrV 7 Tool steels
Data updates
This material has 171 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SEW 60 WCrV 7 Chemical Composition
SEW 200: 1969 / Alloyed cold work tool steels
Looking for full material performance data?
Free registration required • Instant access
SEW 60 WCrV 7 Physical Properties
Temperature
This material has 171 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SEW 60 WCrV 7 Heat Treatments
- Soft annealing: Slowly heated at 710-750°C, held for several hours, slowly cooled, preferably in the furnace.
The soft annealing is most appropriate for machining and cold working and provides the most favorable initial structure for tool hardening.
Hardening: Preheated at 500-600°C and then heated faster at 870-900°C, quenched in oil.
Temperature of oil should be approx. 50°C. When quenching in aqueous salt solutions, the temperature of the quenching agent may rise to 100°C.
Hardening immediately after forging without cooling and annealing is inappropriate because of the risk of cracking.
Stress relief annealing: Slowly heated at 600-650°C, held for 1-2 hours, slowly cooled in the furnace.
SEW 60 WCrV 7 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SEW 60 WCrV 7 International Equivalent Materials
Showing 15 of 85 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 85 international equivalents?
See all 85 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 85Cross References
- 6Composition
- 6Mechanical Properties
- 4Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 8Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 61Total Suppliers