SAE 420FSe Stainless steels
Data updates
This material has 47 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 420FSe Chemical Composition
SAE AMS 5620J: 2023 / Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Forging Stock 13Cr (0.30 - 0.40C) (420F, 420FSe) Free-Machining Grade, Annealed
Looking for full material performance data?
Free registration required • Instant access
SAE 420FSe Physical Properties
Temperature
This material has 47 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 420FSe Heat Treatments
- Product 12.70 mm and under in nominal thickness and 12.70 mm ± 0.25 mm thick specimens cut from larger bars and forgings shall have hardness not lower than 50 HRC, or equivalent after being heated to 996°C ± 14°C (1825°F ± 25°F), held at heat for 30 minutes ± 3 minutes, and cooled in still air.
SAE 420FSe Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 2Cross References
- 9Composition
- 4Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 28Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers