PROPRIETARY ExELL TUF-DIE Tool steels

Material group: Ferrous Alloys / Tool steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2018-07
Total number of updates: 2
Update History
2018-06

This material has 51 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY ExELL TUF-DIE Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.39
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
5.07
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Mn
VALUE
0.34
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
V
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-62-2

Ellwood Specialty Steel, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY ExELL TUF-DIE Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
25.961 W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 51 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY ExELL TUF-DIE Heat Treatments

  • Stress relieving: After rough machining an annealed component, heat the part to 1200°F (649°C), equalize and hold 1-2 hours. Furnace cool to 900°F (482°C) and then air cool to room temperature.
    Annealing: With a protective atmosphere or vacuum furnace, heat slowly to 1560°F (849°C). Equalize and hold one hour per inch of thickness. Furnace cool 20°F (11°C)/hr to 1100°F (593°C) and equalize. Cool freely in air to room temperature. Hardness will be 229 HB maximum.
    Preheating: Heat to 1200°F (649°C) and equalize. Continue heating to 1550°F (843°C) and equalize. Complete heating to hardening temperature.
    Hardening temperature: 1870°F (1021°C), hold time 30 min, as quenched hardness: 53 ± 2.
    Hardening temperature: 1900°F (1038°C), hold time 15 min, as quenched hardness: 54 ± 2.
    Hardening: Typical austentizing range is 1850-1900°F (1010-1038°C). Hardening temperature can be adjusted to develop added heat resistance. A hardening temperature of 1870°F (1021°C) is normally used for most applications.
    Quenching: Quenching should be performed as rapidly as possible without promoting excess movement or cracking. Typical quenching media include: High speed gas with sufficient positive pressure and circulation in a vacuum furnace; Circulating air/atmosphere; Martempering bath or fluidized bed at 575-1020°F (302-549°C), than air cool; Warm oil.
    Tempering: Temper immediately after quenching to about 150°F (66°C). Temper a minimum of two times with intermediate cooling to room temperature. Do not retemper in the range of 800-975°F (427-524°C) to avoid temper embrittleness.

PROPRIETARY ExELL TUF-DIE Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
1413.4 — 1792.6 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
10 — 12 %
Unlock full details
Full data available with free access View Complete Material Data
Rockwell Hardness (HR)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Reduction of Area
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • -Cross References
  • 6Composition
  • 28Mechanical Properties
  • 13Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • 2Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers