PROPRIETARY TD2/NAAMS Tool steels
Data updates
This material has 19 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY TD2/NAAMS Chemical Composition
Index for stamping dies cast materials, NAAMS Global Standard Components - Stamping, 2015
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY TD2/NAAMS Physical Properties
Temperature
This material has 19 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY TD2/NAAMS Heat Treatments
- Castings shall be annealed by heating slowly and uniformly to 870-900°C and holding for a minimum of one hour plus one hour per 25 mm of section thickness using the maximum section thickness. Castings shall be cooled at a maximum rate of 35°C per hour to 540°C then air cooled to room temperature.
PROPRIETARY TD2/NAAMS Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 6Cross References
- 8Composition
- 1Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers