PROPRIETARY S2333/NAAMS Structural and constructional steels

Material group: Ferrous Alloys / Structural and constructional steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2018-04
Total number of updates: 1
Update History

This material has 20 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY S2333/NAAMS Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.56 – 0.64
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
4.30 – 4.70
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Mn
VALUE
0.70 – 0.90
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
V
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-62-2

Index for stamping dies cast materials, NAAMS Global Standard Components - Stamping, 2015

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY S2333/NAAMS Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.67 — 7.86 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
0.27 — 0.3
Unlock full details
Full data available with free access View Complete Material Data

This material has 20 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY S2333/NAAMS Heat Treatments

  • Castings can be delivered in the annealed or pre-hardened. Pre-hardened castings are typically used for trim steels weighing 20 kg or less.
    Annealed:
    Heat to 840-880C and hold for a minimum of one hour plus one hour per 25 mm of section thickness using the maximum section thickness. Castings shall be furnace cooled to 770°C at a rate not to exceed 20°C per hour, continue cooling in furnace until 650°C at a rate not to exceed 10°C/hr, then air cooled at room temperature.
    Pre-Hardened:
    Pre-heat to 600-750°C and hold for one hour. Heat to 950-970°C and hold for a minimum of one hour plus one hour per 25 mm of section thickness using the maximum section thickness. Air quench with a cooling speed of 15°C per minute. Temper tool as soon as temperature reaches 50-70°C. Temper twice at approximately 675°C. Minimum holding time at temperature is 2 hours. Temper twice. Adjust tempering temperature as necessary to reach final hardness.

PROPRIETARY S2333/NAAMS Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 700 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
190 — 340
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 7 %
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 3Cross References
  • 8Composition
  • 5Mechanical Properties
  • 3Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • -Total Suppliers