ASME X5CrNiMoCuNb14-5 Stainless steels
Data updates
This material has 123 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME X5CrNiMoCuNb14-5 Chemical Composition
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes, EN 10088-3, 2023
Looking for full material performance data?
Free registration required • Instant access
ASME X5CrNiMoCuNb14-5 Physical Properties
Temperature
This material has 123 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME X5CrNiMoCuNb14-5 Heat Treatments
- Hot working (furnace or air cooling): 1150-900°C
+AT - Solution annealing (air or oil cooling): 1030-1050°C (Not suitable for direct application, prompt precipitation hardening after solution annealing is recommended to avoid cracking)
+P930 (air or oil cooling): 1030-1050°C; Precipitation hardening (air cooling): 620°C (4 hours)
+P1000 (air or oil cooling): 1030-1050°C; Precipitation hardening (air cooling): 580°C (4 hours)
+P1070 (air or oil cooling): 1030-1050°C; Precipitation hardening (air cooling): 550°C (4 hours).
ASME X5CrNiMoCuNb14-5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME X5CrNiMoCuNb14-5 International Equivalent Materials
Showing 15 of 46 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 46 international equivalents?
See all 46 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 46Cross References
- 10Composition
- 22Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 41Total Suppliers