GOST 12H1MF-PV Structural and constructional steels
Data updates
This material has 56 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
GOST 12H1MF-PV Chemical Composition
GOST R 57423: 2017 / Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6,4 MPa and temperatures exceeding 400°C. Specifications
Looking for full material performance data?
Free registration required • Instant access
GOST 12H1MF-PV Physical Properties
Temperature
This material has 56 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
GOST 12H1MF-PV Heat Treatments
- Normalization at a temperature of 950°C to 1030°C, tempering from 700°C to 750°C with an exposure of 8 for 1-3 hours, cooling in the air.
The normalization of hot-deformed pipes with a diameter of 140 mm or less from deformation heating is allowed, except pipes made from undeformed billet, at the same time the temperature at the end of the deformation should not be lower than the normalization temperature.
The use of accelerated fan or air-cooling cooling is allowed.
For pipes with a wall thickness of 15 mm or more, the use of individual cooling.
GOST 12H1MF-PV Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
GOST 12H1MF-PV International Equivalent Materials
Showing 1 of 1 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 1 international equivalents?
See all 1 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 1Cross References
- 10Composition
- 12Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 29Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers