NMX TP 310HCbN Stainless steels
Data updates
This material has 83 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
NMX TP 310HCbN Chemical Composition
NMX-B-194: 1996 / Steel industry - seamless ferritic and austenitic alloy steel boiler superheaters and heat exchanger tubes - specifications
Looking for full material performance data?
Free registration required • Instant access
NMX TP 310HCbN Physical Properties
Temperature
This material has 83 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
NMX TP 310HCbN Heat Treatments
- Solution treatment; Austenitizing/Solutioning at min 1900°F (1040°C); Quenched in water or rapidly cooled by other means, at a rate sufficient to prevent re-precipitation of carbides, as demonstrable by the capability of tubes, heat treated by either separate solution annealing or by direct quenching; A solution treating temperature above 1950°F (1065°C) may impair resistance to intergranular corrosion after subsequent exposure to sensitizing conditions in the indicated grades. When specified by the purchaser, a lower temperature stabilization or resolution anneal shall be used subsequent to the higher-temperature solution anneal; Cooling Media: water or other rapid cool.
NMX TP 310HCbN Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
NMX TP 310HCbN International Equivalent Materials
Showing 4 of 64 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 64 international equivalents?
See all 64 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 64Cross References
- 9Composition
- 5Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers