PROPRIETARY Magnifer 50 RG Grade MF 10 Magnetic and electrical materials
Data updates
This material has 41 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Magnifer 50 RG Grade MF 10 Chemical Composition
VDM Metals GmbH, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Magnifer 50 RG Grade MF 10 Physical Properties
Temperature
This material has 41 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Magnifer 50 RG Grade MF 10 Heat Treatments
- Heavily worked stock may need to be soft-annealed before carrying out any further deformation. This annealing is best performed at between 800 °C and 1000 °C. The annealing time – not longer than 1 hour – can be kept shorter the higher the temperature is. Final annealing for obtaining optimum magnetic properties: The appropriate annealing temperature is between 1050 and 1250 °C, with an annealing time of 2 to 8 hours. After this final annealing, the stock must be furnace-cooled to about 450 °C over a period of 5 to 7 hours. Further cooling is then not critical.
PROPRIETARY Magnifer 50 RG Grade MF 10 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Magnifer 50 RG Grade MF 10 International Equivalent Materials
Showing 6 of 6 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 6 international equivalents?
See all 6 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 6Cross References
- 4Composition
- 15Mechanical Properties
- 8Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 7Total Suppliers