PROPRIETARY Oriented Mill-Anneal M-5 Magnetic and electrical materials
Data updates
This material has 30 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Oriented Mill-Anneal M-5 Physical Properties
Temperature
This material has 30 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Oriented Mill-Anneal M-5 Heat Treatments
- A soaking temperature of 790 - 820°C (1450 - 1500°F) for a time of at least 15 minutes is recommended, stress relief annealing should be conducted for the shortest time possible without producing excessive thermal gradients.
Proper specification of the cooling time requires similar consideration. It is recommended that the rate of cooling after annealing does not exceed 103°C (185°F) per hour from soaking temperature to 750°C (1400°F) and not exceed 183°C (330°F) per hour to a temperature of 650°C (1200°F). Steel cores of laminations usually can be removed from the protective atmosphere at 325 - 375°C (600 - 700°F) without ill effect.
PROPRIETARY Oriented Mill-Anneal M-5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Oriented Mill-Anneal M-5 International Equivalent Materials
Showing 4 of 6 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 6 international equivalents?
See all 6 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 6Cross References
- -Composition
- 4Mechanical Properties
- 13Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 6Total Suppliers