PROPRIETARY 20NiCrMo2-2 Structural and constructional steels
Data updates
This material has 643 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 20NiCrMo2-2 Chemical Composition
Lucefin, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 20NiCrMo2-2 Physical Properties
Temperature
This material has 643 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 20NiCrMo2-2 Heat Treatments
- Hot-forming at 1100 to 900°C.
Normalizing at 860 to 880°C, air.
Core hardening at 860 to 900°C, oil, polymer, salt bath.
Carburizing at 880 to 980°C.
Hardening carburizing surf. at 800 to 830°C, oil, polymer, salt bath.
Tempering at 150 to 200°C.
Soft annealing (+A) at 700°C, frunace cooling 10°C/h to 600°C then air.
Isothermal annealing (+I) at 850°C, furnace cooling to 650°C, tha air.
Annealing (+FP) at 950 to 1000°C quick cooling.
End quench hardenability at 870°C, water.
Pre-heating welding (welding must be carried out on the annealed state and before carburizing) at 150 to 350°C.
Stress-relieving after welding at 600°C furnace cooling.
Mechanical properties at different tempering temperatures obtained after quenching at 860°C in oil.
PROPRIETARY 20NiCrMo2-2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY 20NiCrMo2-2 International Equivalent Materials
Showing 15 of 307 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 307 international equivalents?
See all 307 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 307Cross References
- 8Composition
- 116Mechanical Properties
- 5Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 17Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 188Total Suppliers