PROPRIETARY CryElso 5 Structural and constructional steels
Data updates
This material has 160 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CryElso 5 Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CryElso 5 Physical Properties
Temperature
This material has 160 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CryElso 5 Heat Treatments
- Stress relief at 590-630°C (2 minutes per millimetre of thickness); still air cooling. Quenching at 820°C (1 minute per millimetre of thickness), water cooling. Tempering at 590 - 630°C, 2 minutes per millimetre of thickness, still air cooling.
- Cold forming or medium temperature forming (t<500°C).
Level of deformation below 2% - heat treatment: none.
Level of deformation between 2% and 5% - Stress relief: free heating, soaking at temperature 590-630°C (2 minutes per millimeter of thickness); still air cooling.
Level of deformation higher than 5% - quenching and tempering: free heating, soaking at 820°C (1 minute per millimetre of thickness); water cooling (quenching); free heating, soaking at temperature 590-630°C (2 minutes per millimeter of thickness), still air cooling (tempering).
PROPRIETARY CryElso 5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CryElso 5 International Equivalent Materials
Showing 8 of 69 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 69 international equivalents?
See all 69 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 69Cross References
- 14Composition
- 9Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 63Total Suppliers