PROPRIETARY UR 304N Stainless steels
Data updates
This material has 379 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UR 304N Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY UR 304N Physical Properties
Temperature
This material has 379 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UR 304N Heat Treatments
- Hot forming should be carried out at 1150 - 750°C. Solution annealing is not required if hot forming has been performed above 900°C followed by rapid cooling in air or water. Solution annealed at 1000 - 1100°C.
- Hot forming should be carried out at 1150 - 750°C (2102 - 1382°F). Solution annealing is not required if hot forming has been performed above 900°C (1652°F) followed by rapid cooling in air or water.
Solution annealed at 1000 - 1100°C (1832°F - 2012°F).
PROPRIETARY UR 304N Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY UR 304N International Equivalent Materials
Showing 15 of 139 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 139 international equivalents?
See all 139 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 139Cross References
- 8Composition
- 54Mechanical Properties
- 87Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 12Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 77Total Suppliers