PROPRIETARY UR 28 Stainless steels
Data updates
This material has 207 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UR 28 Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY UR 28 Physical Properties
Temperature
This material has 207 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UR 28 Heat Treatments
- Heat at 1100 - 1180°C, followed by rapid cooling - water preferable - (soaking time = 1 - 2 min/mm thickness). A neutral or oxidizing sulphur free atmosphere is preferred. Hot forming: Load into furnace at temperature 1100 - 1150°C with 0.5 to 1 min/mm thickness soaking time - Finish forming above 850°C. Air or preferably activated air cooling after forming.
- Degrease, remove contaminants such as sulphur, low melting point metals, Zn rich paints, etc... Heat at 1100 - 1180°C (2012 - 2156°F), followed by rapid cooling - water preferable - (soaking time = 1 - 2 min/mm thickness). A neutral or oxidizing sulphur free atmosphere is preferred.
Hot forming: load into furnace at temperature 1100 - 1150°C (2012 - 2102°F) with 0.5 to 1 min/mm thickness soaking time. Finish forming above 850°C (1562°F). Air or preferably activated air cooling after forming.
PROPRIETARY UR 28 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY UR 28 International Equivalent Materials
Showing 15 of 64 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 64 international equivalents?
See all 64 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 64Cross References
- 12Composition
- 44Mechanical Properties
- 29Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 6Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 50Total Suppliers