PROPRIETARY UR 2202 Stainless steels
Data updates
This material has 697 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UR 2202 Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY UR 2202 Physical Properties
Temperature
This material has 697 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY UR 2202 Heat Treatments
- Hot formed after heating to temperatures between 950 - 1100°C. If forming is finished above 950°C and cooling is fast enough (activated air or water) the final heat treatment can be avoided.
- Heat treated at temperatures between 980 and 1080°C (1796/1976°F). Rapid air cooling is acceptable up to 50 mm thick, but water quenching is normally preferred.
Hot forming: can be hot formed after heating to temperatures between 950 and 1100°C (1650/2012°F). If forming is finished above 950°C and cooling is fast enough (activated air or water) the final heat treatment can be avoided. When hot forming is applied to blanks welded with 2209 or 2304, a new heat treatment at 1050°C followed by rapid cooling (active air or water) is required.
PROPRIETARY UR 2202 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY UR 2202 International Equivalent Materials
Showing 15 of 350 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 350 international equivalents?
See all 350 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 350Cross References
- 12Composition
- 38Mechanical Properties
- 59Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- 8Stress-Strain
- 1Formability
- -Fatigue
- -Fracture
- -Creep
- 1Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 226Total Suppliers