PROPRIETARY Corrodur 4104 Stainless steels
Data updates
This material has 321 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Corrodur 4104 Chemical Composition
Deutsche Edelstahlwerke GmbH, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Corrodur 4104 Physical Properties
Temperature
This material has 321 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Corrodur 4104 Heat Treatments
- It may be annealed to a fully soft structure by holding the steel or component at a temperature of 800°C followed by slow cooling in air. Care must however be taken to ensure that a temperature of 825°C is not exceeded during annealing; The mechanical properties may be improved by quenching and tempering, in which the steel is first hardened by holding the steel at a temperature between 950°C and 1070°C followed by quenching in air, oil or polymer. The tempering temperature is dependent on the desired strength. In most cases, the QT650 condition is specified and may be obtained by following the hardening treatment with a tempering treatment in the temperature range 550-650°C/air cooled.
PROPRIETARY Corrodur 4104 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Corrodur 4104 International Equivalent Materials
Showing 15 of 164 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 164 international equivalents?
See all 164 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 164Cross References
- 7Composition
- 8Mechanical Properties
- 17Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 122Total Suppliers