PROPRIETARY Electrodur 4005 Stainless steels
Data updates
This material has 503 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Electrodur 4005 Chemical Composition
Deutsche Edelstahlwerke GmbH, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Electrodur 4005 Physical Properties
Temperature
This material has 503 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Electrodur 4005 Heat Treatments
- Usually delivered in the annealed condition. This condition is obtained by heating in the temperature range 745-825°C, followed by slow cooling in a furnace; Also, it may be heat treated by hardening in air or oil after holding at a temperature between 950-1000°C. Although a range of mechanical properties may be obtained by tempering at different temperatures, the QT 650 condition is usually specified and may be obtained by tempering in the temperature range 680-780°C; Also, the material must be heated slowly to temperatures of approx. 800°C, then faster to 1150°C - 1180°C. The forging takes place between 1180°C and 1000°C. A subsequent slow cooling in the oven or in dry ashes or the like materials that ensure slow cooling.
PROPRIETARY Electrodur 4005 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Electrodur 4005 International Equivalent Materials
Showing 15 of 271 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 271 international equivalents?
See all 271 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 271Cross References
- 4Composition
- 5Mechanical Properties
- 12Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 210Total Suppliers