B.S. 1.0435 Structural and constructional steels
Data updates
This material has 313 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. 1.0435 Chemical Composition
EN 10305-3: 2023 / Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
Looking for full material performance data?
Free registration required • Instant access
B.S. 1.0435 Physical Properties
Temperature
This material has 313 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. 1.0435 Heat Treatments
- Welded and cold sized (+CR2) - Not intended for heat treatment after the welding and sizing. If further heat treatment is applied, the resulting mechanical properties may be outside the specified requirements.
- Welded and cold sized (+CR1) - Normally not heat treated, but suitable for final annealing. After annealing or normalizing, the resulting mechanical properties meet the requirements specified for the delivery condition +A or +N, respectively.
Welded and cold sized (+CR2) - Not intended for heat treatment after the welding and sizing. If further heat treatment is applied, the resulting mechanical properties may be outside the specified requirements.
B.S. 1.0435 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. 1.0435 International Equivalent Materials
Showing 15 of 220 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 220 international equivalents?
See all 220 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 220Cross References
- 12Composition
- 6Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 7Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 63Total Suppliers