PROPRIETARY BÖHLER K980 Tool steels
Data updates
This material has 251 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER K980 Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER K980 Physical Properties
Temperature
This material has 251 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER K980 Heat Treatments
- Normalizing: 800°C, air cooling. Annealing: 680 - 710°C, slow controlled cooling in furnace at a rate of 10 - 20°C/hr down to approx. 600°C, further cooling in air. Stress relieving: 600 - 650°C, slow cooling in furnace; intended to relieve stresses set up by extensive machining, or in complex shapes. After through heating, hold in neutral atmosphere for 1 - 2 hours. Hardening: 780 - 810°C, water, holding time at hardening temperature 10 - 20 minutes. Tempering: Slow cooling to tempering temperature immediately after hardening / time in furnace 1 hour for each 20 mm of workpiece thickness but at least 1 hour / cooling in air.
PROPRIETARY BÖHLER K980 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER K980 International Equivalent Materials
Showing 15 of 134 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 134 international equivalents?
See all 134 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 134Cross References
- 5Composition
- 2Mechanical Properties
- 15Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 94Total Suppliers