PROPRIETARY Carpenter CTS BD30P Alloy Stainless steels

Material group: Ferrous Alloys / Stainless steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2016-02
Total number of updates: 1
Update History

This material has 19 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Carpenter CTS BD30P Alloy Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
1.5000
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
14.0000
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Fe
VALUE
Balance
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
V
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-62-2

Carpenter Technology Corporation, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Carpenter CTS BD30P Alloy Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 215 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.474 — 8.1 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
0.27 — 0.3
Unlock full details
Full data available with free access View Complete Material Data

This material has 19 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY Carpenter CTS BD30P Alloy Heat Treatments

  • Annealing: Carpenter CTS BD30P alloy should be annealed in a neutral atmosphere. Heat uniformly to 1600/1650°F (871/899°C), then cool very slowly in the furnace at a rate of no more than 20°F (11°C) degrees per hour until the furnace is black. The furnace should then be turned off and allowed to cool naturally. Annealed hardness is 240/265 HBN. Hardening: Preheat to 1400/1500°F (760/816°C) then increase temperature to 1950/2000°F (1066/1093°C), soak for 15 to 30 minutes, and quench in warm oil or cool in air. Be careful to not overheat the material. Tempering: Carpenter CTS BD30P can be tempered over a range of temperatures from 400°F (204°C) to 1000F (538°C), soaked at least two hour then air cooled to room temperature. Double tempering Carpenter CTS BD30P is suggested. Specific tempering treatment chosen will depend upon a number of factors including the austenitizing temperature utilized, application of a refrigeration treatment and the desired combination of final hardness, toughness and corrosion resistance (see hardness table). Tempering at temperatures of 800°F to 1100°F (427°C to 593°C) will reduce toughness and corrosion resistance. Sub-Zero Cooling: After hardening, the alloy may be refrigerated at -100/-120°F (-73/-84°C) for at least one hour then warmed to room temperature prior to tempering to minimize retained austenite. Refrigeration is most effective when performed within two hours after the austenitizing treatment.

Optimize material selection for your application - Book A Demo

  • -Cross References
  • 9Composition
  • -Mechanical Properties
  • 4Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • 4Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers