VdTÜV LStE 355 Structural and constructional steels
Data updates
This material has 55 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
VdTÜV LStE 355 Chemical Composition
WB 461: 2001 / Fine grained steel with resistance to intergranular stress corrosion cracking with a minimum yield strength of 355 N/mm², material No.1.0569
Looking for full material performance data?
Free registration required • Instant access
VdTÜV LStE 355 Physical Properties
Temperature
This material has 55 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
VdTÜV LStE 355 Heat Treatments
- Normalized: 890 to 930°C, after reaching the temperature in the entire cross-section, cooling in still air; Tempered: at 750°C (Stress realived: 580 to 620°C), at 780°C (Stress relieved: 750 to 780°C), 30 to 90 min cooling in still air (for wt <= 15mm holding time is >=15min and for 15 < wt <= 30mm holding time is >=30min).
VdTÜV LStE 355 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- -Cross References
- 6Composition
- 44Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 1Total Suppliers