PROPRIETARY Hiperco 15 Alloy Structural and constructional steels

Material group: Ferrous Alloys / Structural and constructional steels

Country / Standard: PROPRIETARY

Data updates

Latest Update: 2018-04

Total number of updates: 2

Update History

2016-02

This material has 30 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

PROPRIETARY Hiperco 15 Alloy Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

0.0100

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

15.0000

UNIT

CAS NUMBER

7440-48-4

CRITERIA

VALUE

0.6000

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-89-6

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-96-5

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-02-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

Carpenter Technology Corporation, Product Data Sheets,

Looking for full material performance data?

PROPRIETARY Hiperco 15 Alloy Physical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Modulus of Elasticity

179 — 210 GPa

Unlock full details

Electrical Resistivity

0.41 Ω∙mm²/m

Unlock full details

Density

7.67 — 7.86 kg/dm³

Unlock full details

Electrical Conductivity

val1 S/m

Unlock full details

Poisson Coefficient

val1

Unlock full details

Coefficient of Thermal Expansion (CTE)

val1 10^-6/°C

Unlock full details

This material has 30 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

PROPRIETARY Hiperco 15 Alloy Heat Treatments

Optimum magnetic properties will be achieved if annealed in a dry hydrogen atmosphere. A high vacuum furnace can also be used. For heavy gage strip or bulk parts, anneal at 2156°F (1180°C) for 6 hours then cool to 1600°F (871°C) at any cool rate. From 1600°F to 1200°F (871°C to 649°C), cool at a rate not to exceed 150°F (83°C) per hour, and at any rate thereafter. For thin gage (<0.030 inch (0.762 mm) thickness) strip, insulation powders should be used to avoid sticking if annealed at 2156°F (1180°C). For applications with working points being designed at near magnetic saturation or where slightly higher coercivity is acceptable or even desired, a 1400°F (760°C) annealing cycle is recommended for lowering heat treatment cost. Anneal at 1400°F (760°C) for 4 hours and cool at a rate not to exceed 150°F (83°C) per hour to 1200°F (649°C) and at any rate thereafter.

PROPRIETARY Hiperco 15 Alloy Mechanical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Tensile Strength

524 — 662 MPa

Unlock full details

Elongation, A

31 — 34 %

Unlock full details

Reduction of Area

val1 %

Unlock full details

Yield Strength, Rp0.2

345 — 380 MPa

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book A Demo

Looking to compare materials and make better decisions?

Access reliable material data, compare options, and make better decisions faster.

With Total Materia, you can:

Compare materials based on real engineering data

Find equivalent materials across standards

Evaluate performance for your specific conditions

Check compliance with global regulations

See how this works for your specific application

Take a Guided Tour

-Cross References

7Composition
8Mechanical Properties
11Physical Properties
1Heat Treatment
-Metallography
-Machinability

2Stress-Strain
-Formability
-Fatigue
-Fracture
-Creep

-Joints
-Coatings
-Dimensions
-Tribology

-Corrosion
-Ageing
-Weatherability
-Irradiation

1Total Suppliers